Category: Ask Tim Grey

Today’s Question: For an upcoming family event I will be the designated photographer, and so I’ll need to capture of the group. This calls for the typical timer delay and hustle to join the group for the photo. Is there a way to capture a burst of photos rather than a single frame when capturing a group photo in this way?

Tim’s Quick Answer: My recommendation would be to configure your camera to capture a series of images such as you would for a time-lapse, either with a built-in feature if your camera is so equipped, or with a cable release that includes an interval timer feature.

More Detail: I actually used this time-lapse approach for a group photo at a class reunion I attended last weekend (though I won’t be disclosing how many years this reunion celebrated!).

There are a few advantages to this time-lapse approach. First, you’ll ensure you have multiple captures so you can choose the best one, hopefully with everyone smiling with their eyes open. Second, this approach provides a “hands off” approach, which can help streamline the process. I also find that in many cases when you use a wireless transmitter to trigger the captures that the appearance in the photo for the person triggering the captures can be slightly unnatural.

If your camera includes an interval capture feature, this approach is remarkably easy. You can also employ a cable release that includes an interval feature for the same purpose. I typically set the interval so that a photo is captured every five seconds, with no specific limit on the number of photos to be captured. I just stop the capture when I feel that enough photos were captured to ensure a good result.

Of course, the potential drawback is having a relatively large number of photos to go through. You can mitigate this issue by waiting until everyone is in position before starting the capture process. You might also consider increasing the interval time between captures, although I do find that setting an interval of too much time can create challenges for the group that is being asked to pose for an extended period of time.

In addition to streamlining the process of capturing multiple frames for a group photo through the use of a moderate interval between multiple captures, you can also have a bit of fun by assembling a time-lapse video of those captures. The result can often be a rather amusing look at the process of posing for photos, which the group may enjoy seeing in addition to the best still photo from the batch.

Today’s Question: What do you consider the best time to rename photos? In your video you suggest doing it at the time of import, but I was wondering if a more appropriate time might be at the end after I have imported and refined to just the images that I want.

Tim’s Quick Answer: In general I prefer to rename photos at the time of download or import. This helps ensure there will never be any inconsistencies, such as if you sent a copy of a photo to a client right before renaming the photo. However, as long as you don’t delay significantly in reviewing your photos, it also makes sense to rename after you have deleted any outtakes so there won’t be any gaps in the file numbering for the photos that remain.

More Detail: In large part the question here relates to your tolerance for having “missing” image numbers in the filename sequence.

As noted above, my personal preference is to rename as early in the workflow as possible to avoid any risk of confusion. Essentially I want to ensure that the filenames applied when renaming the images represent the only filenames anyone will ever see. If you rename upon downloading your photos or when importing into Lightroom, that will ensure that nobody will have seen any filename other than the “new” filename.

That said, some photographers prefer to rename later in their workflow so that deleting photos won’t cause gaps in the sequence number that is typically used as part of the file renaming structure. I certainly understand this preference, but to me that is secondary to renaming earlier in my workflow.

So, the bottom line is that I recommend renaming photos as early in your workflow as possible. If you want to rename after deleting outtakes, that would mean trying to be sure you review for outtakes as soon after downloading your images as possible, and that you rename immediately after that review.

Today’s Question: You showed us in several videos how to correct a misspelled keyword in Lightroom with a right click. However, if the word is also listed correctly and you try to change the misspelled one, Lightroom will tell you that word is already used and won’t let you change it. So how do I fix those?

Tim’s Quick Answer: In this scenario you will need to filter based on the misspelled keyword, add the correct keyword from the Keyword List, and then delete the misspelled keyword from the Keyword List.

More Detail: Lightroom enables you to quickly correct a misspelled keyword for multiple photos by simply editing the misspelled keyword tag on the Keyword List found on the right panel in the Library module. However, if the correct spelling already exists as a keyword, Lightroom won’t let you edit the misspelled keyword to the correct spelling. So you’ll need to first add the correctly spelled keyword and then delete the misspelled keyword. Fortunately that process is also quite simple.

Start by filtering all of your images that have the misspelled keyword. You can do this very quickly by hovering your mouse over the misspelled keyword in the Keyword List on the right panel in the Library module, and then clicking on the right-pointing arrow that appears to the right of the number indicating how many images have that keyword applied. This will take you to the All Photographs collection with a filter applied for the keyword you selected.

To apply the correctly spelled keyword to the photos you’ve filtered, you’ll first need to select all of them. You can do that by choosing Edit > Select All from the menu (or pressing Ctrl+A on Windows or Command+A on Macintosh). You need to be in the Grid view (rather than the Loupe view), but this will have been set automatically when you applied the filter based on the misspelled keyword.

To add the correctly spelled keyword to the selected photos, you need to turn on the checkbox for that keyword on the Keyword List. So, click in the space to the left of the correct keyword so that a checkmark appears there. Note that if the correctly spelled keyword had already been applied to some of the selected images you’ll see a dash rather than an empty space to the left of the keyword on the Keyword List.

Now that the correct version of the keyword has been applied to all images that had the incorrectly spelled version applied, you can delete the keyword with the incorrect spelling. To do so simply right-click on the incorrectly spelled keyword on the Keyword List and choose Delete from the popup menu that appears.

Today’s Question: Is there a way to send multiple RAW images from Lightroom to Photoshop as Smart Objects? I’ve selected multiple photos but only one opens in Photoshop.

Tim’s Quick Answer: The solution is to right-click on one of the selected images to access the “Edit In” command, rather than choosing the command from the Photo menu on the menu bar.

More Detail: When you select multiple photos in Lightroom and then use one of the commands on the “Edit In” submenu found on the “Photos” menu on the menu bar, Lightroom will only send the one active image to Photoshop, without sending the other selected images.

If instead you right-click on one of the selected images and choose the applicable command from the “Edit In” submenu that appears on the popup menu, all of the selected photos will be sent to Photoshop.

So in this case you could select the multiple photos, right-click on one of the selected images, and then choose “Open as Smart Object in Photoshop” from the “Edit In” submenu. If you don’t want to use the Smart Object feature you could instead right-click and choose “Edit in Adobe Photoshop” from the “Edit In” menu. With either command, all of the selected images will be opened in Photoshop.

Again, the key is to right-click on one of the selected images to access the popup menu, rather than using the menu bar at the top of the Lightroom interface.

Today’s Question: With some photos when I use the clipping preview while adjusting the Blacks, I see an odd behavior. Usually when I drag the Blacks slider to the white, the pixels gradually disappear until there is no clipping. Sometimes, however, nothing seems to happen for a while, and then all of the pixels that appear clipped disappear all at once. Why does this happen, and should I be concerned about it?

Tim’s Quick Answer: The issue here is that the detail is clipped in the original capture, and thus can’t be recovered. I would therefore tend to set the Blacks value to the point right before all of the pixels disappear in the clipping preview display.

More Detail: The Blacks and Whites sliders found in Adobe Camera Raw, Lightroom, and other software for optimizing photos, is designed to enable you to establish the white point and black point for an image. In theory, that means you would increase brightness for the brightest pixels in a photo so that the brightest pixel is white or nearly white, and similarly darken the darkest pixels to produce a true black.

Of course, in some cases the black and white values may have already been clipped in the original capture, meaning detail was lost in those areas based on the original exposure.

When using RAW capture, the initial black and white point values may reflect clipping based on the default interpretation of the capture data, but you may be able to recover what appears to be lost detail by refining the adjustments for the black and white points.

However, while it is indeed possible to recover “lost” detail for a RAW capture by refining the black and white point adjustments, there are limits to what is possible. If the information was truly lost, meaning texture in the brightest or darkest areas of a scene was truly lost, that information can’t be recovered.

For example, if you include the sun in the frame but the exposure settings were such that the sun was completely blown out with no detail, you can’t recover texture in the sun. You may be able to darken the pure white texture to be a pure gray texture, but you can’t actually recover texture variations if the information wasn’t included in the original capture.

In a situation where some detail was lost in the brightest or darkest areas of a photo, in general I prefer to set the black or white point adjustment to the point just before the details is recovered, reflecting the actual clipping that occurred in the original capture while preserving as much detail and contrast as possible. Naturally you will want to fine-tune these adjustments based on the specific image and your preference for how to interpret the image.

Today’s Question: In a recent “Ask Tim Grey” eNewsletter you recommended turning off the stabilization feature on a lens when using a tripod. Would that also be your recommendation when using a monopod? I often seem to have focus problems when using a Canon 100-400 zoom lens on a monopod, and I wonder if the stabilization feature might be part of the issue.

Tim’s Quick Answer: When using a monopod under typical circumstances I recommend keeping the stabilization feature of your lens (or camera body) turned on.

More Detail: While a monopod certainly provides a degree of stability for capturing photos, that stability is not as stable as what is provided with a tripod. In other words, even when using a monopod, there will generally be at least a slight amount of movement of the camera.

Therefore, I recommend leaving image stabilization features of your lens or camera body turned on when using a monopod. The only exception would be when a monopod is further stabilized. For example, some monopods include expandable levers on the single foot that provide additional stability, effectively converting the monopod into a tripod at least in terms of the stability provided. Similarly, if you were to attach the monopod to a fence or other structure, the monopod would provide the same benefits as a tripod.

But under normal circumstances in the context of using a monopod, I do recommend having stabilization features enabled when using a monopod in your photography.

Today’s Question: I want to buy some larger media cards for my camera. I wonder whether I should get the fastest card available or save money and get something a little slower. I mostly shoot landscape and wildlife photography.

Tim’s Quick Answer: While it is certainly “safe” (though more expensive) to opt for the fastest media cards available, you’ll also want to consider the performance of your camera and how important you feel it is to maximize download speeds to your computer.

More Detail: For many photographers choosing the fastest available media cards won’t provide any real advantage for their workflow. Only those photographers with a need to capture or download a large number of photos quickly will faster cards provide a performance benefit.

The first thing to consider is write speed at the time of capture. The actual write speed of the media card only becomes a factor when you fill up the buffer on the camera. When you capture photos they are initially stored in a memory buffer in the camera, and then written out to the media card. If the buffer never gets full, you aren’t taxing the ability of your camera to write images to the media card.

Of course, if you do fill the buffer on the camera on a regular basis, the fastest card available can make the difference between getting a shot and missing the shot. So, if you ever have the experience where you capture a burst of images and then the camera won’t let you capture new photos until the buffer is cleared, a faster card will likely help. You will also, however, want to check the write speed of the camera, as there won’t be any real benefit in terms of capture if you have a card that is faster than your camera.

Note that if you capture video with your camera you will also want to be sure that any cards you purchase support the requirements for capturing video. This is especially important for cameras that support 4K video resolution.

The second consideration is download time. A faster card may enable faster downloads, so you don’t need to wait as long for your photos to download to your computer. Of course, you also need to take into account the capabilities of your computer, such as the card reader and data port speeds.

So, if downloading quickly is important to you, you’ll want to not only opt for a fast card, but also make sure you have a card reader and data port (such as a USB 3.0 port). For example, the Lexar Professional USB 3.0 reader (http://amzn.to/2vAP7vO) connected to a USB 3.0 port should ensure optimal download speeds with a high-speed media card.

Because media card prices continue to be very competitive, I do think it is a reasonable strategy to simply purchase the fastest cards available. But you can also choose a card based on your own priorities, and based on the performance capabilities of your camera and other tools in your workflow.

Today’s Question: I recently had a huge problem with Windows 10 and had to restore from a backup. Immediately afterward Lightroom would not launch, saying the catalog was corrupted. I finally got it working by making a copy of a backup catalog. I was under the impression that thumbnails for files on an external drive that is not connected would still show up in the Library module. Now I get the exclamation point [indicating photos are missing] but the thumbnail is just gray. What am I missing here?

Tim’s Quick Answer: You’ll likely need to re-create the thumbnails and previews for your images, because it appears the file that contains the previews for the photos in your catalog became disconnected from the actual catalog file.

More Detail: Because Lightroom employs a catalog to manage the information about your photos, you are able to browse images even when the source files are not available (such as when the external hard drive containing photos is disconnected from your computer). This can be a tremendous workflow advantage, of course.

However, the previews for your photos are actually stored in a file separate from the catalog file. Furthermore, when you backup your Lightroom catalog, the previews are not included as part of that backup.

When you restored from a backup copy of your catalog, the previews file from your original catalog may not have matched the backup catalog you restored from. Therefore, you would need to build previews again, which will also provide you with updated thumbnails for all photos.

To build previews for all photos, first make sure the source image files are available to Lightroom, such as by connecting the external hard drive that contains your photos. You can then choose “All Photographs” from the Catalog section of the left panel in the Library module within Lightroom to view all images. Next, select all photos by choosing Edit > Select All from the menu. Finally, choose Library > Previews > Build Standard-Sized Previews from the menu. Lightroom will generate previews (and thumbnails) for all photos in your catalog. This process will require a bit of time, but once the previews have been generated you will once again be able to browse your photos even when the source image files are not currently available.

Today’s Question: I’m trying to create a selection of the sky in a composite panorama [in Photoshop], so that I can apply an adjustment to only the sky. I’m using the Quick Selection tool, but only the sky from one of the photos that was used to assemble the panorama is getting selected. How can I select the entire sky across all images in the composite panorama?

Tim’s Quick Answer: The key to creating a selection that includes pixels from all layers is to enable the “Sample All Layers” checkbox found on the Options bar.

More Detail: The tools in Photoshop that create selections based on sampling the image generally provide a “Sample All Layers” option so your selection can be based on all layers in the image rather than only the layer that is currently active on the Layers panel.

In most cases I find that I prefer having the “Sample All Layers” checkbox turned on when using any selection tool in Photoshop that includes this setting. For one thing, doing so enables me to create a selection based on all layers in a composite image such as a composite panorama.

In addition, turning on “Sample All Layers” will cause the selection to take any adjustments into account. This can be helpful for situations where there isn’t very strong tonal or color contrast to define the area you want to select. You can add a “temporary” adjustment layer to exaggerate the differences between the area you want to select versus not select, and then with the “Sample All Layers” checkbox turned on the adjustment will be taken into account for defining the selection. You can then discard the “temporary” adjustment layer.

Of course, you’ll also want to be aware of the “Sample All Layers” checkbox so you can remember to turn it off for situations where you want to create a selection based exclusively on a single image layer. But in general I find most photographers will tend to want the “Sample All Layers” setting turned on rather than off.

To learn more about selections in Photoshop, check out my “Mastering Selections in Photoshop” course, which is included in the “Photoshop for Photographers” bundle of courses available on the GreyLearning website here:

http://timgrey.me/atg99ps

Today’s Question: From my initial use with Lightroom, I included a “Libraries” folder on my hard drive, which in turn contains the “My Pictures” folder. I very much want to move the “My Pictures” folder (and all of the contents) up into the top level of the hard drive, so that folder is no longer in the “Libraries” folder. I’d hoped to be able to accomplish this task within Lightroom by dragging and dropping “My Pictures” to the top of the drive. Alas, no can do. Is there a way to rectify this?

Tim’s Quick Answer: In order to move folders (and therefore photos) to the top (root) level of a hard drive within Lightroom, you need to choose the option to reveal the parent folder for one of the top-level folders on that drive. That will cause the hard drive to be represented as a folder at the top of your folder structure, so you can then drag and drop folders to that top level.

More Detail: By default Lightroom does not present the root level of a hard drive as a destination you can drag and drop other folders (or photos) to. The listing for the hard drive in the Folders section of the left panel in the Library module can’t be used as a destination for drag-and-drop operations, making it appear that it isn’t possible to drag a folder to the root level of a hard drive.

However, there is a way to represent the root level of the hard drive as a folder, so you can drag and drop folders or photos to that location.

Simply right-click on one of the top-level folders shown on the hard drive, and choose the “Show Parent Folder” command. This will reveal the root level of the hard drive as a folder at the top of the list of folders. You can then drag and drop any folders or photos you’d like to that top-level folder.

Note, by the way, that at any time you can hide the top-level folder by right-clicking on that folder and choosing the “Hide This Parent” command.