RGB Values in Lightroom


Today’s Question: Arthur Morris asked a question in his blog about checking the RGB values in Lightroom. When I use the eyedropper tool it shows a value in percentage. Is there a way to show the actual RGB values?

Tim’s Quick Answer: It is possible to view RGB values in Lightroom as 8-bit per channel values (0 to 255) rather than as a percentage (0-100), but only by enabling the Soft Proofing display in the Develop module. It is critical to keep in mind that the Soft Proofing preview (and therefore the RGB value presented) are based on the specific profile and settings you establish for the soft proofing display, and thus don’t necessarily represent the actual final RGB values for the image.

More Detail: When you move your mouse over the image in Lightroom’s Develop module, the RGB values for the pixel under the current mouse position will be displayed below the histogram at the top of the right panel. Those values are displayed as a percentage rather than the range from zero to 255 that are commonly used to describe RGB data.

You can turn on the Soft Proofing checkbox on the toolbar below the image preview area to have the RGB values shown as 8-bit per channel RGB values (0-255) rather than as percentages. However, those values will be based on the settings established for soft proofing, meaning the values are only meaningful in the context of a specific printer, ink, and paper combination.

What that translates to is that I recommend only using the Soft Proofing option if you are indeed preparing a photo to be printed, and you need to evaluate the output you can expect based on a specific printer, ink, and paper combination.

For more general purposes, I recommend leaving the Soft Proofing checkbox turned off while applying adjustments to your images and evaluating the overall photo. That means you’ll see RGB values as a percentage rather than the 8-bit values you might be accustomed to. But a little bit of math can provide a translation, and with a little bit of experience you’ll gain an understanding of how the values relate to each other.

It is worth noting that the 8-bit values themselves aren’t a full representation of the information in your images, assuming we’re talking about RAW captures, for example. Lightroom actually processes your photos (in the Develop module) with a 16-bit per channel workflow. In other words, the actual underlying values for a photo could range from zero to 65,536, not just zero to 255.

I should also hasten to add that I don’t agree with Arthur Morris’ suggestion that the brightest value for an image should have RGB values of around 240 or so. As far as I’m concerned there is no reason to restrict your processing of a RAW capture to avoid white values that are brighter than a specific value. With some print workflows there used to be (and in some cases still is) a reason to keep the whites from getting too bright. That isn’t the case today for most workflows. Restricting your bright values arbitrarily is only limiting the dynamic range of your final image, without providing a true benefit.

“Save for Web” is Missing


Today’s Question: I recently upgraded my version of Photoshop CC, and now the “Save for Web” command is missing. Has this feature been discontinued? I’ve been using this option to create PNG images with transparency, and want to be able to continue using “Save for Web”. What happened?!

Tim’s Quick Answer: In effect, the “Save for Web” command previously found on the File menu in Photoshop has simply be renamed to “Export”. There is an option for “Quick Export as PNG”, or you can choose “Export As” to configure the settings similar to what you had previously done with the “Save for Web” feature.

More Detail: The “Quick Export as PNG” command will create a PNG that preserves transparency, so this option will likely work perfectly well for you. When you’re ready to save an image as a PNG (Portable Network Graphics) file, simply choose File > Export > Quick Export as PNG from the menu. This will bring up the Save As dialog, where you can specify the filename and location for the PNG image that will be created. Click the Save button, and the PNG will be saved.

If you prefer to configure specific settings for the PNG image being created, you can instead choose File > Export > Export As from the menu. This will bring up the Export As dialog, which allows you to configure all of the various settings for the PNG image (or a JPEG or GIF, for example) very similar to the approach you would have taken with the “Save for Web” dialog in previous versions of Photoshop.

If you prefer to use the previous “Save for Web” dialog, you can still access that dialog in the latest version of Photoshop. Simply choose File > Export > Save for Web (Legacy) from the menu, and you’ll see the Save for Web dialog you’re familiar with.

Precise Selection Size


Today’s Question: With the Crop tool I can draw a rectangle that is exactly 5 inches by 7 inches, for example. But what if I don’t want to crop? What if I just want to select an area with that span? Or draw a rectangle shape exactly that way? Can either of these tools be done to an exact size?

Tim’s Quick Answer: Yes, with most of the selection and shape tools (such as the Rectangular Marquee and Rectangle tools in this example) can be used to create a shape of specific dimensions in inches (or any other unit of measure). You’ll first want to confirm the image dimensions and resolution in the Image Size dialog, and then you can specify the shape size using the settings on the Options bar.

More Detail: When you specify dimensions for a shape, those dimensions are affected by the pixel per inch (ppi) resolution for the image. In other words, since Photoshop is really dealing with pixels, in order to communicate inches accurately you need to specify how many pixels should be counted as one inch. For example, when printing you will typically use a resolution of around 300 pixels per inch.

To review (or change) the ppi resolution for an image in Photoshop, choose Image > Image Size from the menu to bring up the Image Size dialog. There you’ll see a pixel per inch resolution, though you can also change this resolution to reflect centimeters per inch if you prefer.

If you want to change the resolution for the image, first turn off the Resample checkbox, so the number of pixels in the image can’t be changed. Then set the Resolution value to the desired number, and click OK to apply the change. Note that with this approach you are only changing the pixel per inch resolution for the image, without actually changing the size (the number of pixels) for the image.

Now you are ready to specify the specific size for a selection or shape using inches as your unit of measure. With the Rectangular Marquee tool, for example, you can choose the “Fixed Size” option from the Style popup, and then enter values for Width and Height. For the Rectangle tool you will always see the W (Width) and H (Height) fields on the Options bar.

The default unit of measure for the Width and Height values is pixels, which is abbreviated “px” after the numeric value. You can change the unit of measure by simply changing this text. So for five inches you could enter “5 in” for example. In addition to “px” for pixels and “in” for inches, you can also specify dimensions in centimeters using “cm”.

With the dimensions established, you can easily create the selection or shape at the desired size by clicking within the image. By default, that selection or shape will then be created automatically, with the point you clicked within the image becoming the top-left corner of the selection or shape.

Lightroom Presets


Today’s Question: I just learned about Lightroom presets. Can you provide some guidelines for selection? How do I know which are safe?

Tim’s Quick Answer: Presets in Lightroom simply represent saved settings. That means those presets are safe to use (provided you know what they do and actually want that task performed). It also means that anything you can accomplish with a preset you could also accomplish on your own by establishing specific settings within Lightroom.

More Detail: Among the more common presets found for Lightroom are Develop presets. These presets simply save specific settings for the adjustments available in the Develop module. There is nothing you can accomplish with a Develop preset that you couldn’t also accomplish through the use of the adjustment controls within the Develop module.

In other words, if you purchase a set of presets for Lightroom’s Develop module, what you’re paying for is the convenience of having those settings saved for you. Presets can be incredibly convenient, and they can also provide creative inspiration for your photos. But those presets are just saved settings, and thus are only able to set existing options within Lightroom.

So, if you see a set of presets you like, there is no reason to avoid them. And by using such presets, you may find that in addition to getting some additional creative inspiration for your photos, you may learn how to make better use of Lightroom in the process.

Color Correcting Video


Today’s Question: Is it possible to adjust the color for videos in Lightroom? When I go to the Develop module it says it isn’t supported for video.

Tim’s Quick Answer: Yes, it most certainly is possible to apply limited color corrections to video clips within Lightroom. The adjustments can be applied via the Quick Develop controls in the Library module or via a present created in the Develop module. However, you must then export the video to create a new version with the corrections applied.

More Detail: For a simple approach to correcting color (or applying other general adjustments) to videos in Lightroom, you can use the controls found in the Quick Develop section of the right panel in the Library module. Simply select the video you want to correct, and pause the video on a frame that is representative of the overall video. Then click the “single arrow” button for the desired adjustment to apply a small change, or the “double arrow” button to apply a larger change. For example, you can click the right arrow button for Temperature under the White Balance heading to shift the color toward yellow, or click the left arrow button to shift the color toward blue.

You can also use a preset from the Develop module to apply corrections to a video. First you’ll need to capture a still from the video. To do so, first go to the frame in the video that you would like to capture. Then click the “Frame” button (the rectangular icon) on the set of controls below the video and choose “Capture Frame” from the popup.

Next, go to the Develop module, and apply adjustments to the frame you captured. Note that only a subset of the adjustments is actually available for video clips, so you’ll want to restrict yourself to those adjustments. These include the Auto options, White Balance, Exposure, Contrast, Whites, Blacks, Saturation, Vibrance, the Tone Curve, Treatment (color versus black and white), Split Toning, Process Version, and Calibration. Once you’ve applied the desired adjustments, create a preset based on those adjustments.

With a Develop preset created, you can then apply that preset to one or more videos in the Library module. Select the desired videos, and then click the Saved Preset popup in the Quick Develop section of the right panel and choose that preset.

Again, to actually make use of the video with the adjustments applied you will need to export the videos from Lightroom. Just be sure you don’t use the “Original, unedited file” option from the Video Format popup in the Video section of the Export dialog, as doing so will cause the original video to be exported without any adjustments applied.

RAW Processing


Today’s Question: Is there any reason why you would choose to use Lightroom or Photoshop versus Canon’s Digital Photo Professional for RAW conversion? Everything I hear is that the raw converter is superior to Lightroom or Photoshop converters.

Tim’s Quick Answer: There are two key reasons I use Lightroom (and Photoshop) to process my RAW captures, rather than the software from the camera manufacturer (such as Digital Photo Professional in the case of Canon cameras). First, I am able to get excellent results with my images using Lightroom. Second, workflow efficiency is an important consideration to me.

More Detail: To be sure, when using RAW processing software created by the camera manufacturer, there are some potential advantages that may improve image quality. Put simply, the camera manufacturer understands the image sensor in your camera better than just about anyone else, and can use that knowledge to make their software better at processing RAW captures from a given sensor.

That said, there have been some rather dramatic improvements in RAW-processing software across the board over the years, to the extent that I consider the advantage of using the software provided by the manufacturer to be (in many cases) a relatively modest advantage.

I have tested a wide variety of software tools on many different images, and have found that in most cases the differences in results translate into simple differences, not dramatically different results in terms of image quality. I have also found that I prefer the workflow within Lightroom for organizing and optimizing my images, and don’t like the notion of using other software outside of this workflow for processing the initial RAW captures.

I certainly encourage photographers to evaluate different solutions based on their own specific needs. In the context of RAW processing, I highly recommend testing out various software solutions to see what works best for you in terms of both image quality and workflow efficiency. I’ve been impressed with many of the software tools that are currently available, but on balance I find that a Lightroom-based workflow best suits my specific needs.

Negative Image


Today’s Question: I’ve been wanting to create negatives from my digital images in order to make chemical-based prints. I have both Lightroom and Photoshop Elements. I can make a negative using Photoshop Elements, but I would like to stay in Lightroom. Is there a way in Lightroom to create a negative image?

Tim’s Quick Answer: It is possible to create a negative version of an image, but in this context it won’t be as simple as simply inverting the photo. Instead you’ll need to create a customized curve optimized for the final output conditions, which can require considerable trial-and-error to accomplish.

More Detail: The key to an inverted image is an inverted Tone Curve adjustment. To get started, make sure you are in the Point Curve mode rather than Parametric mode. If you see sliders for Highlights, Lights, Darks, and Shadows below the curve display in the Tone Curve section of the right panel in the Develop module, click the Point Curve button at the bottom-right of the Tone Curve section to switch modes.

Next, drag the black end point at the bottom-left of the curve display all the way to the top-left corner, and drag the white end point at the top-right of the curve display all the way to the bottom-right corner. This will create a basic inverted image, but it isn’t necessarily an optimal result for your final output.

If you are working with a black and white image, the process will be relatively straightforward. You can simply choose the “Black & White” option under the Treatment header in the Basic section of adjustments, and you’ll have a grayscale inverted image at this point.

However, even with a black and white image the simple inversion won’t necessarily provide an optimal tonal distribution in the final print based on a negative created from the adjusted image. If you are working with a color image the process is even more complicated, with a need to adjust the individual color curves found on the Channel popup below the histogram display.

So, it is most certainly possible to create an inverted image in Lightroom, but creating an adjustment that will produce good results in a print based on such a negative image can be a bit of a challenge. That said, once you have identified a set of adjustments that produce a good print, you can save a preset based on those adjustments to provide a good starting point for other images you want to print in the same way.

Pen versus Lasso Tools


Today’s Question: What are your thoughts concerning the use of the Freeform Pen Tool (with the Magnetic option) vs. the Magnetic Lasso Tool [in Photoshop]?

Tim’s Quick Answer: In theory I prefer the additional flexibility provided by the Pen tools in Photoshop, but in actual practice I generally find the Lasso and Magnetic Lasso tools are all I really need in the context of photographic images.

More Detail: In essence, there are two sets of features to consider here. One is the magnetic feature, and the other is the method of drawing shapes.

In terms of the magnetic feature, I consider the two tool options to be equal to each other. In other words, you can expect the same basic results with the Magnetic Lasso tool compared to the Freeform Pen tool with the Magnetic option enabled.

Therefore, the key difference for our purposes relates to how you actually create a shape with these tools. The Lasso tools allow you to “manually” draw any shape you’d like, while the Pen tools allow you to define shapes based on vector paths. In other words, with one of the Pen tools you can create a shape based on anchor points, defining (or refining) lines and curves between those anchor points.

So, with either the Magnetic Lasso tool or the Freeform Pen tool you can define a shape based on contrast edges within a photo. In other words, you can create a shape that follows an object within the photo in a relatively automated way.

The key difference is that when you’re finished defining a shape with the Freeform Pen tool, you have a set of anchor points that can be refined just as you might change shapes when creating a path using the other variations on the Pen tool. That provides a degree of additional flexibility, to be sure.

However, I find that for most photographic images a vector shape doesn’t provide a tremendous advantage. The shapes I need to define within a photographic image are generally a bit more complicated than can be easily defined with vectors, and thus I need to use a raster-based shape.

So, again, the Freeform Pen tool provides an advantage over the Magnetic Lasso tool, but that advantage is something I find I generally am not able to really take advantage of in the context of a photographic image.

Undo a Move?


Today’s Question: I’m seeking clarification [regarding the answer about the warning when moving photos within Lightroom that appeared in the July 24th edition of the Ask Tim Grey eNewsletter]. Should I assume that the Lightroom warning about moving photos not being undoable means that you can’t move the files back to their original location if you change your mind?

Tim’s Quick Answer: You can still move photos back to the original location if you decide you should not have moved those photos in the first place. The warning in Lightroom simply means you can’t “automatically” return photos to the original location using the Undo command.

More Detail: The warning message Lightroom presents when you attempt to move photos within Lightroom makes it sound like once you move photos you will never be able to put those photos anywhere else, and you’ll also lose any other work you’ve performed on the images in Lightroom. In other words, it is a very intimidating message!

What Lightroom is trying to convey with this message is that when you move photos from one folder to another in Lightroom, that is a task that Lightroom can’t keep track of in terms of the history of what has been done with an image. Therefore, you can’t simply choose the Undo command if you later decide you didn’t really want to move the photos in the first place.

However, you can most certainly move photos again if you change your mind. In other words, Lightroom can’t move photos back to their original location through the Undo command, but you can certainly move photos from one folder to another and back again. So, if you move photos to a different folder and then discover this was a mistake, you can select those photos in their new location and drag them to their original location (or any other location you’d like).

The key is to make sure you are always moving photos within Lightroom, not outside of Lightroom. If you move (or rename) photos or folders outside of Lightroom, then Lightroom won’t be able to keep track of those changes, and you will be unable to continue properly managing those photos within Lightroom.

Projector Profiles


Today’s Question: I am the digital chair for a camera club. We’ve calibrated our projector using a high-end calibration system using the club’s laptop. My question is this: when a guest speaker comes in with their own laptop, if we copy the projector profile from the club’s laptop to the presenter’s laptop will we get the proper calibration?

Tim’s Quick Answer: If you are using a digital connection (DVI) for your projector, you can achieve relatively consistent results among multiple computers, provided all other conditions (including the screen and ambient lighting) remain consistent. If you are using an analog connection (VGA), your results will be less consistent (or even wildly inconsistent) from one computer to the next.

More Detail: When you calibrate and profile a digital projector (just as with a monitor display), you are measuring the behavior of that projector in the specific context of the current environment. That includes the computer (and therefore the display adapter) being used to send information to the projector, as well as the screen being used, ambient lighting conditions, and other factors.

If you are using a completely digital connection (from the computer’s display adapter to the cable to the digital projector) the results will be much more consistent. Therefore, it is possible to get very good results with a single ICC profile shared among multiple computers.

On the other hand, if you are using an analog connection (via a VGA cable), the analog signal (and the conversion between digital and analog) may introduce significant variability from one computer to the next. In this situation I would recommend creating a profile for each computer that will be used with the digital projector.